Often asked: How To Change Year Settings On Lacrosse Alarm Clock?

How do you change the date on a lacrosse clock?

Atomic Clocks may also be set manually and be very accurate. Simply insert the battery, press your time zone and then press the flap just above the left side of the battery. Hold until you reach the correct time and then release.

How do I set the time and date on my LaCrosse weather station?

How to Reset the Time on a LaCrosse Weather Station

  1. Press and hold the “Set” button on the unit for five seconds.
  2. Press and release the “Set” button to set the contrast.
  3. Press and release the “CH/+” button to toggle Daylight Savings Time “On” or “Off.” Press and release the “Set” button.

How do I set the time zone on my lacrosse atomic clock?


  1. Hold down the “SET” button for 2 seconds, the default setting “-5EST” will flash in the Date LCD.
  2. Press and release the “+” button to select the appropriate time zone.
  3. Press and release the “SET” button to confirm the time zone setting, and to advance to DST (Daylight saving time) setting.
You might be interested:  Question: How To Throw Lacrosse Ball?

How do you turn off the alarm on a lacrosse clock?

Press the ALARM button once to activate the alarm. The alarm icon will appear. Press the ALARM button again to deactivate the alarm.

How do you set an alarm on an atomic clock?

To set the alarm time, press AND HOLD the “ALARM” button on the side of the alarm clock until the HOUR flashes to enter into alarm time set mode.

How do I change the time zone on my weather station?

From the menu, select Settings > Devices. Each device added to your account is listed. From the device, select Edit. Update its Time Zone.

How do you reset a lacrosse weather station?

Performing a factory reset Press and hold the gray button on the gateway then plug the AC adaptor back into the gateway. Make sure to keep the gray button pressed while doing this. Keep the grey button held in until the red light comes on, goes off then comes back on a second time, then let go of the button.

Why is my weather station not working?

Cause: This can occur if the console is not being supplied with adequate power. The power cable might be loose. Solution: Check the power supply and the cable connection. Make sure that the power supply is plugged securely into the power outlet.

Where is reset button on AcuRite weather station?

To reset using the RESET button located in the battery compartment of the display or clock:

  1. Please verify that you are using a name brand (Rayovac, Energizer, Duracell, or Kirkland) standard alkaline batteries in the display unit.
  2. Remove all power, (AC adapter and batteries) from the display unit.
You might be interested:  FAQ: Where To Get Cheap Lacrosse Shafts?

How do you adjust AcuRite temperature sensor?

My AcuRite® App: How to set the reading calibration of a sensor

  1. From the tab/navigation bar, select. (Settings menu).
  2. Select Manage Devices.
  3. Select the name of the device the sensor is linked to.
  4. Select the sensor and set your desired Adjustments.
  5. Select Save to update.

Leave a Reply

Your email address will not be published. Required fields are marked *